Return To Restaurant Listing | Return to Environmental Health Homepage

Facility: Brothers Royal Crown
Address: 2689 N. Buhach Road, Atwater, CA

The most recent inspection of this food facility resulted in a rating of
Good (Total Points: 6.00)
0-6  Points: Good
7-13 Points: Satisfactory
14+  Points: Unsatisfactory
Rating on date 2-28-2020: Good (Total Points: 6.00)
DateViolationPointsCorrectionInspector CommentsFacility Area
2-28-2020 All utensils and equipment shall be fully operative, clean, and in good repair. (114115, 114175). All utensils and equipment shall be approved, installed properly, and meet applicable standards. (114130, 114130.1, 114130.2, 114130.3, 114130.4, 114130.5, 114130.6, 114132, 114133, 114137, 114139, 114143, 114153, 114155, 114163, 114165, 114167, 114169, 114172, 114175, 114177, 114180, 114182) 2.00 Equipment food-contact surfaces and utensils shall be clean to sight and touch. The food-contact surfaces of cooking equipment and pans shall be kept free of encrusted grease deposits and other debris accumulations.

Keep all food facilities, and all utensils, display cases, windows, counters, shelves, tables, refrigeration units, sinks, dishwashing machines, and other equipment or utensils used in the storage, preparation, sale, service, and display of food, clean, fully operative, and in good repair.

The non-food-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. Equipment shall be reassembled so that food-contact surfaces are not contaminated.
(REPEAT VIOLATION 2) Observed build up of debris/mold on the Siberian Chill slurpee machine dispensers. Clean/sanitize and increase frequency to prevent build up.

Observed build up of debris on the hot coco machine. Clean/sanitize and increase frequency to prevent build up.

Observed build up of soda syrup debris on the soda dispenser nozzles and undercarriage where the nozzles are attached. Clean/sanitize and increase frequency to prevent build up.
0110 RETAIL MARKET<2000 SQ FT (HM3)
2-28-2020 The potable water supply shall be protected with a backflow or back siphonage protection device, as required by applicable plumbing codes. (114192) All plumbing and plumbing fixtures shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose. (114171, 114189.1, 114190, 114192.1, 114193, 114193.1, 114195, 114197, 114199, 114201, 114269) 1.00 All plumbing and plumbing fixtures shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Observed the drain lines from the two compartment and janitorial sink are lacking a minimum one inch air gap between the floor drain and drain lines. Repair to provide the required air gap.

Observed lack of one inch minimum air gap between the drain lines under the soda machines and the rim height of the floor sink. Repair or modify drain lines so that the distance between the lowest edge of the drain lines and the height of the floor sink rim allows for a minimum of a one inch air gap.
0110 RETAIL MARKET<2000 SQ FT (HM3)
2-28-2020 Toilet facilities shall be maintained clean, sanitary and in good repair. Toilet rooms shall be separated by a well-fitting self-closing door. Toilet tissue shall be provided in a permanently installed dispenser at each toilet. The number of toilet facilities shall be in accordance with local building and plumbing ordinances. Toilet facilities shall be provided for patrons: in establishments with more than 20,000 sq ft.; establishments offering on-site food consumption. (113953, 113953.1, 113953.2, 114250, 114250.1, 114276) 1.00 Provide clean toilet facilities in good repair. Provide permanently installed toilet tissue dispenser(s) in all toilet facilities. Provide handwashing facilities within or adjacent to all toilet facilities. Soap shall be provided in dispensers at, or adjacent to, handwashing facilities. Single-use sanitary towels in dispensers or hot-air blowers shall be provided at handwashing facilities.

Customer restrooms are required for food facilities of more than 20,000 square feet if they were constructed after July 1 1984, and also applies to facilities of any size that were constructed after January 1, 2004 where there is onsite consumption of food. A "take-out only" food facility, with no seating indoors or outdoors, may not be required to provide customer restrooms. Check with the Division of Environmental Health and with the appropriate Planning Department before removing or restricting access to customer restrooms.
Observed toilet paper roll not installed in dispenser. Keep all toilet paper in approved dispensers.

Observed the restroom door propped open. Keep the restroom door closed at all times.

Observed the Lid was missing for the soap dispenser inside the restroom at the hand wash station. Provide a lid on the soap dispenser.
0110 RETAIL MARKET<2000 SQ FT (HM3)
2-28-2020 All food shall be separated and protected from contamination. (113984, 113986, 113988, 113990, 114060, 114067, 114069, 114077, 114079, 114089.1 (c), 114143 (c)) 1.00 Destroy all contaminated food. All food shall be prepared, stored, displayed, dispensed, placed, transported, sold, and served as to be protected from dirt, vermin, unnecessary handling, droplet contamination, overhead leakage, or other contamination.
If unpackaged food is displayed and sold in bulk in other than self-service containers, then it shall be served by an employee of the food establishment directly to a consumer and shall be displayed in clean, sanitary, and covered or otherwise protected containers.
For bulk customer self-service food items, such as salad bars, buffet type foods, and other ready-to-eat food, install sneeze guards that intercept a direct line between the customer's mouth and the food being offered, dispense from approved mechanical dispensers, or employ other effective means to protect ready-to-eat food from contamination.
Protect all cartons, boxes, or other materials used in the packaging of any food from dirt, vermin, and other forms of contamination or adulteration.
Observed two cups being used as scooping utensils for roasted peanuts. Provide proper scooping devices with handles stored up not making contact with food items. Provide a lid as well. 0110 RETAIL MARKET<2000 SQ FT (HM3)
2-28-2020 All food employees shall have adequate knowledge of and be trained in food safety as it relates to their assigned duties. The person in charge shall have adequate knowledge of, and shall educate employees of the food facility regarding major food allergens. (113947) Food facilities that prepare, handle or serve non-prepackaged potentially hazardous food, shall have an employee who has passed an approved food safety certification examination. (113947-113947.1) 0.00 The responsibilities of the staff member certified in food safety include ensuring that all employees who handle, or have responsibility for handling, unpackaged foods of any kind have sufficient knowledge to ensure the safe preparation and /or service of the food. The nature and extent of the knowledge that each employee is required to have may be tailored, as appropriate, to the employee's duties related to food safety issues. Note: Food manager certificate will be required if facility is going to be engaging in open food prep. 0110 RETAIL MARKET<2000 SQ FT (HM3)
2-28-2020 Exhaust hoods shall be provided to remove toxic gases, heat, grease, vapors, and smoke and be approved by the local building department. Canopy-type hoods shall extend 6" beyond all cooking equipment. All areas shall have sufficient ventilation to facilitate proper food storage. Toilet rooms shall be vented to the outside air by a screened openable window, an air shaft, or a light-switch activated exhaust fan, consistent with local building codes. (114149, 114149.1) Adequate lighting shall be provided in all areas to facilitate cleaning and inspection. Light fixtures in areas where open food is stored, served, prepared, and where utensils are washed shall be of shatterproof construction or protected with light shields. (114149.2, 114149.3, 114252, 114252.1) 1.00 All areas shall have sufficient ventilation to facilitate proper food storage and to provide a reasonable condition of comfort for each employee, consistent with the job performed by the employee.

Light fixtures in areas where food is prepared, open food is stored, or utensils are cleaned shall be of shatterproof construction or shall be protected with shatterproof shields and shall be readily cleanable. In every room and area in which any food is prepared, manufactured, processed, or prepackaged, or in which equipment or utensils are cleaned, sufficient natural or artificial lighting shall be provided to produce the following light intensity, while the area is in use:
(a) At least 10-foot candles for the following:
(1) At a distance of 30 inches above the floor, in walk-in refrigeration units, and dry food storage areas.
(2) At a working surface on which alcoholic beverages are prepared or where utensils used in the preparation or service of alcoholic beverages are cleaned.
(3) Inside equipment, such as reach-in or under-the-counter refrigerators.
(b) At least 20-foot candles for the following:
(1) At a surface where food is provided for consumer self-service or where fresh produce or prepackaged foods are sold or offered for consumption.
(2) In server stations where food is prepared.
(3) At a distance of 30 inches above the floor in areas used for handwashing, warewashing, and equipment and utensil storage, and in toilet rooms.
(c) Except in server stations where food is prepared, at least 50-foot candles at a surface where a food employee is working with food or working with utensils or equipment such as knives, slicers, grinders, or saws where employee safety is a factor.
Observed lack of a shatterproof light cover over the light fixtures in the warewashing area. Provide shatterproof light covers in all warewashing and food prep areas. Facility may start conducting food prep in this area pending approval. 0110 RETAIL MARKET<2000 SQ FT (HM3)
2-28-2020 A person proposing to build or remodel a food facility shall submit plans for approval before starting any new construction or remodeling of any facility for use as a retail food facility. (114380, 114381) 0.00 A person proposing to build or remodel a food facility shall submit complete, easily readable plans drawn to scale and specifications to the Division of Environmental Health and obtain approval prior to starting any project. Facility has inquired about 0101 PE to be added to facility. Facility would like to engage in open food prep. Send spec sheets of all equipment proposing to be used. Facility needs to be approved prior to installing/using any equipment. All items must be commercial grade. 0110 RETAIL MARKET<2000 SQ FT (HM3)


Rating on date 3-28-2019: Good (Total Points: 6.00)
DateViolationPointsCorrectionInspector CommentsFacility Area
3-28-2019 All nonfood contact surfaces of utensils and equipment shall be clean. (114115, 114130.4) 4.00 Clean nonfood contact surfaces of equipment at a frequency necessary to prevent accumulation of residue. Observed dust build up on the fan blade covers in the beer walk-in fridge and shatterproof light cover. Clean and increase frequency to prevent build up.

(REPEAT VIOLATION) Observed build up of debris/mold on the slurpee machine dispenser. Clean/sanitize and increase frequency to prevent build up.

Observed the build up of dust on the fan unit inside the restroom. Clean and increase frequency to prevent build up.
0110 RETAIL MARKET<2000 SQ FT (HM3)
3-28-2019 An accurate easily readable metal probe thermometer suitable for measuring temperature of food shall be available to the food handler. A thermometer +/- 2°F shall be provided for each hot and cold holding unit of potentially hazardous foods and high temperature warewashing machines. (114157, 114159) 2.00 Have a thermometer accurate to within 2°F or 1°C in each hot and cold holding unit. Have a metal probe type thermometer readily available on premises (to all appropriate staff) that is calibrated in accordance with the manufacturer's specifications as necessary to ensure accuracy. Observed the lack of a thermometer in the food section of the walk-in fridge unit that holds milk, sandwiches , and other perishable items. Provide a thermomter in this section of the fridge unit. 0110 RETAIL MARKET<2000 SQ FT (HM3)