Return To Restaurant Listing | Return to Environmental Health Homepage

Facility: Stop 2 Save Food & Liquor
Address: 1230 E Martin Luther King Jr Way, Merced, CA

The most recent inspection of this food facility resulted in a rating of
Good (Total Points: 0.00)
0-6  Points: Good
7-13 Points: Satisfactory
14+  Points: Unsatisfactory
Rating on date 12-06-2019: Good (Total Points: 0.00)
DateViolationPointsCorrectionInspector CommentsFacility Area
12-06-2019 No violations were noted during this inspection. 0.00 This food facility currently meets California Retail Food Code requirements, and is authorized by the Merced County Division of Environmental Health to be open for business. The permit is issued to the current business owner of record and is non-transferable. All other violations from the previous inspection have been corrected. 0110 RETAIL MARKET<2000 SQ FT (HM3)


Rating on date 11-06-2019: Unsatisfactory - reinspection required (Total Points: 22.00)
DateViolationPointsCorrectionInspector CommentsFacility Area
11-06-2019 Failure to keep food pure and free from contamination, adulteration and spoilage. Any food is adulterated if it bears or contains any poisonous or deleterious substance that may render it impure or injurious to health. (113967, 113976, 113980, 113988, 113990, 114035, 114254(c), 114254.3) 7.00 Provide adequate protection at all times to keep food pure and free from contamination, adulteration and spoilage. Destroy all contaminated, adulterated and spoiled food. Observed bulging cans of Hunt's Pasta Sauce dated for best by June 2015 on the shelf in market. Remove. Cans past their sell by or best by date that show bulging or other visible adulteration shall be removed from sale and destroyed. Cans removed, stored in a marked area to be sent back as vendor returns. Corrected during inspection.

Recommend all canned goods that are very far past their sell by or test by dates.
0110 RETAIL MARKET<2000 SQ FT (HM3)
11-06-2019 Handwashing signs shall be posted in each toilet room, directing attention to the need to thoroughly wash hands after using the restroom. (113953.5)

No smoking signs shall be posted in food preparation, food storage, and warewashing areas. (113978)

Consumers shall be notified that clean tableware is to be used when they return to self-service areas such as salad bars and buffets. (114075)

Any food facility constructed before January 1, 2004 without public toilet facilities shall prominently post a sign within the food facility in a public area stating that toilet facilities are not provided. (113725.1, 114276, 114381 (e))
1.00 Post permit in a conspicuous place (It is recommended that the permit be in customer view.). Post a notice advising patrons that a copy of the most recent routine inspection report is available for review by interested parties. Keep a copy of the most recent health inspection report at the facility for customer review purposes.

Post and maintain a legible and conspicuous sign in each toilet room directing attention to the need to thoroughly wash hands after using the toilet.

Post and maintain a legible "No Smoking" sign in food preparation, food storage, and utensil washing areas.

Observed lack of knowledge of the location of a copy of the most recent health inspection at the facility location. Maintain a copy of the most recent health inspection at the facility location, and ensure that employees are aware of its whereabouts and can provide a copy for customer inspection during all hours of operation. A new copy of most recent inspection report is being provided to the facility on this date. Corrected during inspection. 0110 RETAIL MARKET<2000 SQ FT (HM3)
11-06-2019 Food facilities that prepare food shall be equipped with warewashing facilities. Testing equipment and materials shall be provided to measure the applicable sanitization method. (114067(f,g), 114099, 114099.1, 114099.2, 114099.3, 114099.4, 114099.5, 114099.6, 114099.7, 114101, 114101.1, 114101.2, 114103, 114107, 114125) 2.00 Provide a sink with at least 3 compartments with 2 integral metal drainboards. The sink compartments and drainage facilities shall be large enough to accommodate the largest utensil or piece of equipment to be cleaned therein.

Clean the utensils in one of the following ways:

(1) Manual warewashing shall be accomplished by using a 3-compartment sink where the utensils are first pre-cleaned, then washed, rinsed, sanitized, and air dried. The temperature of the washing solution shall be maintained at not less than 100°F or the temperature specified on the cleaning agent manufacturer's label instructions. The utensils shall then be rinsed in clear water before being immersed in a sanitizing solution. Manual sanitization shall be accomplished in the final sanitizing rinse by one of the following:
(a) Immersion for at least 30 seconds where the water temperature is maintained at 171°F or above.
(b) The application of sanitizing chemicals by immersion, manual swabbing, or brushing, using one of the following solutions:
(1) Contact with a solution of 100 ppm available chlorine solution for at least 30 seconds.
(2) Contact with a solution of 25 ppm available iodine for at least one minute.
(3) Contact with a solution of 200 ppm quaternary ammonium for at least one minute.
(4) Contact with a solution of ozone that meets the requirements of Section 180.940 of Title 40 of the Code of Federal Regulations and that is generated by a device located onsite at the food facility that meets all of the requirements of 114099.6.
(c) Other methods approved by the enforcement agency.

(2) Mechanical machine warewashing shall be accomplished by using an approved machine installed and operated in accordance with the manufacturer's specifications. Soiled items to be cleaned in a warewashing machine shall be loaded in racks, trays, or baskets or onto conveyors in a position that exposes the items to the unobstructed spray during all cycles and allows the items to drain. Mechanical sanitization shall be accomplished in the final sanitizing rinse by one of the following:
(a) By being cycled through equipment achieving a utensil surface temperature of 160°F or above.
(b) The mechanical application of sanitizing chemicals by pressure spraying methods using one of the following:
(1) Contact with a solution of 50 ppm available chlorine solution for at least 30 seconds.
(2) Contact with a solution of 25 ppm available iodine for at least one minute.
(3) Contact with any chemical sanitizer that meets the requirements of Section 180.940 of Title 40 of the Code of Federal Regulations when used in accordance with both the sanitizer manufacturers use directions and the machine manufacturer's specifications.

Provide testing equipment and materials to adequately measure the applicable sanitization method.
REPEAT VIOLATION
Obtain chlorine type test strips.
Observed lack of test strips to measure the applicable manual sanitizer concentration. Obtain and use test strips to verify sanitizer is of sufficient strength to act as an appropriate manual sanitizing agent (100 ppm for chlorine, 200 ppm for quat ammonia).
0110 RETAIL MARKET<2000 SQ FT (HM3)
11-06-2019 Exhaust hoods shall be provided to remove toxic gases, heat, grease, vapors, and smoke and be approved by the local building department. Canopy-type hoods shall extend 6" beyond all cooking equipment. All areas shall have sufficient ventilation to facilitate proper food storage. Toilet rooms shall be vented to the outside air by a screened openable window, an air shaft, or a light-switch activated exhaust fan, consistent with local building codes. (114149, 114149.1) Adequate lighting shall be provided in all areas to facilitate cleaning and inspection. Light fixtures in areas where open food is stored, served, prepared, and where utensils are washed shall be of shatterproof construction or protected with light shields. (114149.2, 114149.3, 114252, 114252.1) 1.00 All areas shall have sufficient ventilation to facilitate proper food storage and to provide a reasonable condition of comfort for each employee, consistent with the job performed by the employee.

Light fixtures in areas where food is prepared, open food is stored, or utensils are cleaned shall be of shatterproof construction or shall be protected with shatterproof shields and shall be readily cleanable. In every room and area in which any food is prepared, manufactured, processed, or prepackaged, or in which equipment or utensils are cleaned, sufficient natural or artificial lighting shall be provided to produce the following light intensity, while the area is in use:
(a) At least 10-foot candles for the following:
(1) At a distance of 30 inches above the floor, in walk-in refrigeration units, and dry food storage areas.
(2) At a working surface on which alcoholic beverages are prepared or where utensils used in the preparation or service of alcoholic beverages are cleaned.
(3) Inside equipment, such as reach-in or under-the-counter refrigerators.
(b) At least 20-foot candles for the following:
(1) At a surface where food is provided for consumer self-service or where fresh produce or prepackaged foods are sold or offered for consumption.
(2) In server stations where food is prepared.
(3) At a distance of 30 inches above the floor in areas used for handwashing, warewashing, and equipment and utensil storage, and in toilet rooms.
(c) Except in server stations where food is prepared, at least 50-foot candles at a surface where a food employee is working with food or working with utensils or equipment such as knives, slicers, grinders, or saws where employee safety is a factor.
Observed the light fixture in the walk in refrigerator does not function, bulb may be burned out. Replace bulb and / or repair fixture. Failure to provide adequate lighting. 0110 RETAIL MARKET<2000 SQ FT (HM3)
11-06-2019 Any food is misbranded if its labeling is false or misleading, if it is offered for sale under the name of another food, or if it is an imitation of another food for which a definition and standard of identity has been established by regulation. (114087, 114089, 114089.1(a, b), 114090, 114093.1, 114377) 2.00 Present all food in a way that does not mislead or misinform consumers. Food or color additives, colored overwraps, lights or other misleading artificial means shall not be used to misrepresent the true appearance, color, or quality of a food.

The label shall contain the following information:
(1) The common name of the food.
(2) A list of ingredients in descending order of predominance by weight.
(3) The weight, count, or volume.
(4) The name and place of business of the manufacturer, packer, or distributor.
Nutrition labeling may also be required, and must be included when it is available from the manufacturer.

Food facility's or manufacturer's dating information, such as date codes or "use by" statements on packaging may not be concealed or altered.
REPEAT VIOLATION
Observed frozen ice cream, popsicles, and other frozen items in the ice cream display freezer that were lacking labeling. They appear to be not for individual sale. Do not sell items not meant for individual resale.
Some appear to have melted and then become refrozen. Remove.
0110 RETAIL MARKET<2000 SQ FT (HM3)
11-06-2019 An adequate, protected, pressurized, potable supply of hot water and cold water shall be provided at all times. (113953(c), 114099.2(b) 114101(a), 114189, 114192, 114192.1, 114195) 3.00 Provide hot and cold water under pressure through a mixing valve to each sink compartment. The water supply shall be from a water system approved by the health officer or the state department. An adequate, protected, pressurized, potable supply of hot water, at least 120°F, and cold water shall be provided.

Handwashing facilities shall be equipped to provide warm water under pressure for a minimum of 15 seconds. If the temperature of water provided is not readily adjustable at the faucet, the temperature of the water shall be at least 100°F, but not greater than 108°F. Handwashing facilities shall be sufficient in number and conveniently located so as to be accessible at all times for use by food employees
Observed the hot water was sitting at 119F. Evaluate and provide 120F minimum. 0110 RETAIL MARKET<2000 SQ FT (HM3)
11-06-2019 Each food facility shall be kept free of live animals and vermin: rodents (rats, mice), cockroaches, flies.( 114259.1, 114259.4, 114259.5) 6.00 Live animals are not allowed in a food facility, except as specified in section 114259.5.

A food facility shall immediately cease operation when there is a vermin infestation that has resulted in the contamination of food contact surfaces, food packaging, utensils, food equipment, or adulteration of food(s). The food facility shall remain closed until:
(a) there is no longer evidence of a vermin infestation.
(b) all contaminated surfaces have been cleaned and sanitized.
(c) contributing factors such as cleaning, repairs, and the elimination of harborages have been resolved.

All contributing factors must be resolved as quickly as possible. If there is a vermin infestation that warrants a major violation, then the permit to operate may be suspended. Professional pest control may also be required as frequently as needed to prevent the infestation from recurring.
REPEAT VIOLATION
Observed cockroaches in the facility. The premises of each food facility shall be kept free of vermin.

Remove clutter, deep clean, and fill all gaps and holes to help prevent further infestation.
0110 RETAIL MARKET<2000 SQ FT (HM3)


Rating on date 9-28-2018: Satisfactory (Total Points: 12.00)
DateViolationPointsCorrectionInspector CommentsFacility Area
9-28-2018 Each food facility shall be kept free of live animals and vermin: rodents (rats, mice), cockroaches, flies.( 114259.1, 114259.4, 114259.5) 2.00 Live animals are not allowed in a food facility, except as specified in section 114259.5.

A food facility shall immediately cease operation when there is a vermin infestation that has resulted in the contamination of food contact surfaces, food packaging, utensils, food equipment, or adulteration of food(s). The food facility shall remain closed until:
(a) there is no longer evidence of a vermin infestation.
(b) all contaminated surfaces have been cleaned and sanitized.
(c) contributing factors such as cleaning, repairs, and the elimination of harborages have been resolved.

All contributing factors must be resolved as quickly as possible. If there is a vermin infestation that warrants a major violation, then the permit to operate may be suspended. Professional pest control may also be required as frequently as needed to prevent the infestation from recurring.
Observed cockroaches in the back living space near the utensil sink and near the mop sink in the restroom. The premises of each food facility shall be kept free of vermin. 0110 RETAIL MARKET<2000 SQ FT (HM3)
9-28-2018 Handwashing signs shall be posted in each toilet room, directing attention to the need to thoroughly wash hands after using the restroom. (113953.5)

No smoking signs shall be posted in food preparation, food storage, and warewashing areas. (113978)

Consumers shall be notified that clean tableware is to be used when they return to self-service areas such as salad bars and buffets. (114075)

Any food facility constructed before January 1, 2004 without public toilet facilities shall prominently post a sign within the food facility in a public area stating that toilet facilities are not provided. (113725.1, 114276, 114381 (e))
2.00 Post permit in a conspicuous place (It is recommended that the permit be in customer view.). Post a notice advising patrons that a copy of the most recent routine inspection report is available for review by interested parties. Keep a copy of the most recent health inspection report at the facility for customer review purposes.

Post and maintain a legible and conspicuous sign in each toilet room directing attention to the need to thoroughly wash hands after using the toilet.

Post and maintain a legible "No Smoking" sign in food preparation, food storage, and utensil washing areas.

Observed lack of a visibly posted notice to inform patrons that the facility is inspected by the local health department. Maintain a sign in a conspicuous location to inform patrons that the facility is inspected. (A copy of the required notice is available on the Merced County Environmental Health website). 0110 RETAIL MARKET<2000 SQ FT (HM3)
9-28-2018 Food facilities that prepare food shall be equipped with warewashing facilities. Testing equipment and materials shall be provided to measure the applicable sanitization method. (114067(f,g), 114099, 114099.1, 114099.2, 114099.3, 114099.4, 114099.5, 114099.6, 114099.7, 114101, 114101.1, 114101.2, 114103, 114107, 114125) 2.00 Provide a sink with at least 3 compartments with 2 integral metal drainboards. The sink compartments and drainage facilities shall be large enough to accommodate the largest utensil or piece of equipment to be cleaned therein.

Clean the utensils in one of the following ways:

(1) Manual warewashing shall be accomplished by using a 3-compartment sink where the utensils are first pre-cleaned, then washed, rinsed, sanitized, and air dried. The temperature of the washing solution shall be maintained at not less than 100°F or the temperature specified on the cleaning agent manufacturer's label instructions. The utensils shall then be rinsed in clear water before being immersed in a sanitizing solution. Manual sanitization shall be accomplished in the final sanitizing rinse by one of the following:
(a) Immersion for at least 30 seconds where the water temperature is maintained at 171°F or above.
(b) The application of sanitizing chemicals by immersion, manual swabbing, or brushing, using one of the following solutions:
(1) Contact with a solution of 100 ppm available chlorine solution for at least 30 seconds.
(2) Contact with a solution of 25 ppm available iodine for at least one minute.
(3) Contact with a solution of 200 ppm quaternary ammonium for at least one minute.
(4) Contact with a solution of ozone that meets the requirements of Section 180.940 of Title 40 of the Code of Federal Regulations and that is generated by a device located onsite at the food facility that meets all of the requirements of 114099.6.
(c) Other methods approved by the enforcement agency.

(2) Mechanical machine warewashing shall be accomplished by using an approved machine installed and operated in accordance with the manufacturer's specifications. Soiled items to be cleaned in a warewashing machine shall be loaded in racks, trays, or baskets or onto conveyors in a position that exposes the items to the unobstructed spray during all cycles and allows the items to drain. Mechanical sanitization shall be accomplished in the final sanitizing rinse by one of the following:
(a) By being cycled through equipment achieving a utensil surface temperature of 160°F or above.
(b) The mechanical application of sanitizing chemicals by pressure spraying methods using one of the following:
(1) Contact with a solution of 50 ppm available chlorine solution for at least 30 seconds.
(2) Contact with a solution of 25 ppm available iodine for at least one minute.
(3) Contact with any chemical sanitizer that meets the requirements of Section 180.940 of Title 40 of the Code of Federal Regulations when used in accordance with both the sanitizer manufacturers use directions and the machine manufacturer's specifications.

Provide testing equipment and materials to adequately measure the applicable sanitization method.
Obtain chlorine type test strips.
Observed lack of test strips to measure the applicable manual sanitizer concentration. Obtain and use test strips to verify sanitizer is of sufficient strength to act as an appropriate manual sanitizing agent (100 ppm for chlorine, 200 ppm for quat ammonia).
0110 RETAIL MARKET<2000 SQ FT (HM3)
9-28-2018 A food facility shall not be open for business without a valid permit. (114067(b) & (c), 114365, 114365.5, 114381, 114381.1 114381.2, 114387, 114390) 2.00 Pay the required annual permit fees. Renewal fees for existing permits for each calendar year are assessed and due in January of each year.

For purposes of enforcement, an enforcement officer may, during the facility's hours of operation and other reasonable times, enter, inspect, issue citations to, and secure any sample, photographs, or other evidence from a food facility or any facility suspected of being a food facility, or a vehicle transporting food to or from a retail food facility, when the vehicle is stationary at an agricultural inspection station, a border crossing, or at any food facility under the jurisdiction of the enforcement agency, or upon the request of an incident commander. It is a violation for any person to refuse to permit entry or inspection, or interfere with the performance of the duties of an enforcement officer, including making verbal or physical threats or sexual or discriminatory harassment.

Close the facility until a permit is obtained from the Division of Environmental Health.
Observed lack of the current health permit being posted within the facility. Ensure that the current valid health permit is posted within the facility. 0110 RETAIL MARKET<2000 SQ FT (HM3)
9-28-2018 Any food is misbranded if its labeling is false or misleading, if it is offered for sale under the name of another food, or if it is an imitation of another food for which a definition and standard of identity has been established by regulation. (114087, 114089, 114089.1(a, b), 114090, 114093.1, 114377) 2.00 Present all food in a way that does not mislead or misinform consumers. Food or color additives, colored overwraps, lights or other misleading artificial means shall not be used to misrepresent the true appearance, color, or quality of a food.

The label shall contain the following information:
(1) The common name of the food.
(2) A list of ingredients in descending order of predominance by weight.
(3) The weight, count, or volume.
(4) The name and place of business of the manufacturer, packer, or distributor.
Nutrition labeling may also be required, and must be included when it is available from the manufacturer.

Food facility's or manufacturer's dating information, such as date codes or "use by" statements on packaging may not be concealed or altered.
Observed frozen ice cream that were lacking labeling. They appear to be not for individual sale. Provide complete labeling information as outlined in the corrective text on all prepackaged food items. 0110 RETAIL MARKET<2000 SQ FT (HM3)
9-28-2018 Handwashing soap and single use towels or drying device shall be provided in dispensers adjacent to each handwashing facility; dispensers shall be maintained in good repair. (113953.2) Adequate separate facilities shall be provided for handwashing, food preparation, and the washing of utensils and equipment. (113953, 113953.1) 2.00 Handwashing facilities shall be sufficient in number and conveniently located so as to be accessible at all times for use by food employees. Employees shall not clean their hands in a sink used for food preparation, warewashing, or in a service sink or a curbed cleaning facility used for the disposal of mop water and similar liquid waste. Do not place objects in front of the handwashing station, and do not place items, utensils or wiping cloths in the handwashing sink.

Handwashing facilities shall be equipped to provide warm water under pressure for a minimum of 15 seconds. If the temperature of water provided is not readily adjustable at the faucet, the temperature of the water shall be at least 100°F, but not greater than 108°F. Soap shall be provided in approved dispensers at, or adjacent to, handwashing facilities (no bars of soap). Single-use sanitary towels or hot-air blowers shall be provided at handwashing facilities in approved dispensing devices.
Observed lack of hand soap in the approved dispenser at the handwashing sink in the restroom. Keep an approved soap dispenser filled and functional at all times for handwashing purposes. Dish soap is being used instead of hand soap. 0110 RETAIL MARKET<2000 SQ FT (HM3)