Return To Restaurant Listing | Return to Environmental Health Homepage

Facility: Donut Nation
Address: 1255 E. Pacheco Blvd, Los Banos, CA

The most recent inspection of this food facility resulted in a rating of
Good (Total Points: 6.00)
0-6  Points: Good
7-13 Points: Satisfactory
14+  Points: Unsatisfactory
Rating on date 2-16-2021: Good (Total Points: 6.00)
DateViolationPointsCorrectionInspector CommentsFacility Area
2-16-2021 The walls / ceilings shall have durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair. (114065, 114067, 114069, 114175, 114143, 114257, 114259.2, 114266, 114268, 114268.1, 114271, 114272) 1.00 All food facilities shall be kept clean, fully operative, and in good repair. Floor surfaces in all areas in which food is prepared, packaged or stored, where any utensil is washed, where refuse or garbage is stored, where janitorial facilities are located, and in all restrooms and hand washing areas shall be smooth and of durable construction and made from non absorbent material that is easily cleanable.

Each permanent food facility shall be fully enclosed in a building consisting of permanent floors, walls, and an overhead structure that meets minimum standards. Food facilities that are not fully enclosed on all sides and that are in operation on January 1, 1985, shall not be required to meet the requirements of this section until the facility is remodeled or has a significant menu change or a change in its method of operation. Full enclosure is not required for dining areas and certain other areas when approved for outdoor food services.
UNDER THE LARGE STAINLESS STEEL TABLE NEXT TO THE EXHAUST HOOD: Deteriorated flooring pieces (concrete floor visible) underneath the table legs. Replace. 0101 FOOD ESTAB. W/FOOD PREP 0-49 SEATS (HM4)
2-16-2021 All food employees shall have adequate knowledge of and be trained in food safety as it relates to their assigned duties. The person in charge shall have adequate knowledge of, and shall educate employees of the food facility regarding major food allergens. (113947) Food facilities that prepare, handle or serve non-prepackaged potentially hazardous food, shall have an employee who has passed an approved food safety certification examination. (113947-113947.1) 3.00 The responsibilities of the staff member certified in food safety include ensuring that all employees who handle, or have responsibility for handling, unpackaged foods of any kind have sufficient knowledge to ensure the safe preparation and /or service of the food. The nature and extent of the knowledge that each employee is required to have may be tailored, as appropriate, to the employee's duties related to food safety issues. FOOD HANDLER CARDS FOR EMPLOYEES WHO DO NOT HAVE A FOOD MANAGER CERTIFICATE: All individuals who are involved in the preparation, storage or service of food, including their supervisors, must have a Food Handler Card. The card must be obtained from a California Department of Health Services approved food handler card examination, and must be less than three years old. Exceptions: Facilities subject to collective bargaining agreements, facilities with approved in-house training, grocery stores, stores which are primarily pharmacies, school cafeterias, health care facilities, certain nutrition programs for the elderly, government-run facilities such as jails and camps, certified farmers markets, commissaries, mobile support units, bed and breakfasts, and snack bars in theaters and amusement parks. Note, however, that full service restaurants within amusement parks are not exempt. Keep the cards on site for review upon request by our office. 0101 FOOD ESTAB. W/FOOD PREP 0-49 SEATS (HM4)
2-16-2021 All utensils and equipment shall be fully operative, clean, and in good repair. (114115, 114175). All utensils and equipment shall be approved, installed properly, and meet applicable standards. (114130, 114130.1, 114130.2, 114130.3, 114130.4, 114130.5, 114130.6, 114132, 114133, 114137, 114139, 114143, 114153, 114155, 114163, 114165, 114167, 114169, 114172, 114175, 114177, 114180, 114182) 1.00 Equipment food-contact surfaces and utensils shall be clean to sight and touch. The food-contact surfaces of cooking equipment and pans shall be kept free of encrusted grease deposits and other debris accumulations.

Keep all food facilities, and all utensils, display cases, windows, counters, shelves, tables, refrigeration units, sinks, dishwashing machines, and other equipment or utensils used in the storage, preparation, sale, service, and display of food, clean, fully operative, and in good repair.

The non-food-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. Equipment shall be reassembled so that food-contact surfaces are not contaminated.
1) 1-DOOR MILK REFRIGERATOR NEAR THE FRONT COUNTER: Rusty shelves. Repair or replace.

2) FRONT COFFEE COUNTER: Remove all duct tape from the shelf edges and properly repair the edges to be smooth, easily cleanable, and non-absorbent.

3) WOOD SHELF (FRUIT FILLING MACHINE) NEXT TO THE DISHWASHING SINK: Peeling paint surfaces. Repair.

4) 2-DOOR TALL REFRIGERATOR: Rusty and moldy shelves. Clean. Repair or replace.

5) MICROWAVE TABLE: Unfinished wood shelf. Repair or replace to provide smooth, easily cleanable, and non-absorbent surfaces. Shelf is currently lined with parchment paper.

6) ROLLING CART FOR SHEET PANS: Remove the cardboard from the sides of the unit.
0101 FOOD ESTAB. W/FOOD PREP 0-49 SEATS (HM4)
2-16-2021 Food facilities that prepare food shall be equipped with warewashing facilities. Testing equipment and materials shall be provided to measure the applicable sanitization method. (114067(f,g), 114099, 114099.1, 114099.2, 114099.3, 114099.4, 114099.5, 114099.6, 114099.7, 114101, 114101.1, 114101.2, 114103, 114107, 114125) 1.00 Provide a sink with at least 3 compartments with 2 integral metal drainboards. The sink compartments and drainage facilities shall be large enough to accommodate the largest utensil or piece of equipment to be cleaned therein.

Clean the utensils in one of the following ways:

(1) Manual warewashing shall be accomplished by using a 3-compartment sink where the utensils are first pre-cleaned, then washed, rinsed, sanitized, and air dried. The temperature of the washing solution shall be maintained at not less than 100°F or the temperature specified on the cleaning agent manufacturer's label instructions. The utensils shall then be rinsed in clear water before being immersed in a sanitizing solution. Manual sanitization shall be accomplished in the final sanitizing rinse by one of the following:
(a) Immersion for at least 30 seconds where the water temperature is maintained at 171°F or above.
(b) The application of sanitizing chemicals by immersion, manual swabbing, or brushing, using one of the following solutions:
(1) Contact with a solution of 100 ppm available chlorine solution for at least 30 seconds.
(2) Contact with a solution of 25 ppm available iodine for at least one minute.
(3) Contact with a solution of 200 ppm quaternary ammonium for at least one minute.
(4) Contact with a solution of ozone that meets the requirements of Section 180.940 of Title 40 of the Code of Federal Regulations and that is generated by a device located onsite at the food facility that meets all of the requirements of 114099.6.
(c) Other methods approved by the enforcement agency.

(2) Mechanical machine warewashing shall be accomplished by using an approved machine installed and operated in accordance with the manufacturer's specifications. Soiled items to be cleaned in a warewashing machine shall be loaded in racks, trays, or baskets or onto conveyors in a position that exposes the items to the unobstructed spray during all cycles and allows the items to drain. Mechanical sanitization shall be accomplished in the final sanitizing rinse by one of the following:
(a) By being cycled through equipment achieving a utensil surface temperature of 160°F or above.
(b) The mechanical application of sanitizing chemicals by pressure spraying methods using one of the following:
(1) Contact with a solution of 50 ppm available chlorine solution for at least 30 seconds.
(2) Contact with a solution of 25 ppm available iodine for at least one minute.
(3) Contact with any chemical sanitizer that meets the requirements of Section 180.940 of Title 40 of the Code of Federal Regulations when used in accordance with both the sanitizer manufacturers use directions and the machine manufacturer's specifications.

Provide testing equipment and materials to adequately measure the applicable sanitization method.
2-COMPARTMENT DISHWASHING SINK: Replace the (2) missing sink drain plugs. 0101 FOOD ESTAB. W/FOOD PREP 0-49 SEATS (HM4)