Return To Restaurant Listing | Return to Environmental Health Homepage

Facility: Gustine Sinclair
Address: 32932 Sullivan Rd, Gustine, CA

The most recent inspection of this food facility resulted in a rating of
Good (Total Points: 2.00)
0-6  Points: Good
7-13 Points: Satisfactory
14+  Points: Unsatisfactory
Rating on date 7-26-2024: Good (Total Points: 2.00)
DateViolationPointsCorrectionInspector CommentsFacility Area
7-26-2024 Food facilities that prepare food shall be equipped with warewashing facilities. Testing equipment and materials shall be provided to measure the applicable sanitization method. (114067(f,g), 114099, 114099.1, 114099.2, 114099.3, 114099.4, 114099.5, 114099.6, 114099.7, 114101, 114101.1, 114101.2, 114103, 114107, 114125) 1.00 Provide a sink with at least 3 compartments with 2 integral metal drainboards. The sink compartments and drainage facilities shall be large enough to accommodate the largest utensil or piece of equipment to be cleaned therein.

Clean the utensils in one of the following ways:

(1) Manual warewashing shall be accomplished by using a 3-compartment sink where the utensils are first pre-cleaned, then washed, rinsed, sanitized, and air dried. The temperature of the washing solution shall be maintained at not less than 100°F or the temperature specified on the cleaning agent manufacturer's label instructions. The utensils shall then be rinsed in clear water before being immersed in a sanitizing solution. Manual sanitization shall be accomplished in the final sanitizing rinse by one of the following:
(a) Immersion for at least 30 seconds where the water temperature is maintained at 171°F or above.
(b) The application of sanitizing chemicals by immersion, manual swabbing, or brushing, using one of the following solutions:
(1) Contact with a solution of 100 ppm available chlorine solution for at least 30 seconds.
(2) Contact with a solution of 25 ppm available iodine for at least one minute.
(3) Contact with a solution of 200 ppm quaternary ammonium for at least one minute.
(4) Contact with a solution of ozone that meets the requirements of Section 180.940 of Title 40 of the Code of Federal Regulations and that is generated by a device located onsite at the food facility that meets all of the requirements of 114099.6.
(c) Other methods approved by the enforcement agency.

(2) Mechanical machine warewashing shall be accomplished by using an approved machine installed and operated in accordance with the manufacturer's specifications. Soiled items to be cleaned in a warewashing machine shall be loaded in racks, trays, or baskets or onto conveyors in a position that exposes the items to the unobstructed spray during all cycles and allows the items to drain. Mechanical sanitization shall be accomplished in the final sanitizing rinse by one of the following:
(a) By being cycled through equipment achieving a utensil surface temperature of 160°F or above.
(b) The mechanical application of sanitizing chemicals by pressure spraying methods using one of the following:
(1) Contact with a solution of 50 ppm available chlorine solution for at least 30 seconds.
(2) Contact with a solution of 25 ppm available iodine for at least one minute.
(3) Contact with any chemical sanitizer that meets the requirements of Section 180.940 of Title 40 of the Code of Federal Regulations when used in accordance with both the sanitizer manufacturers use directions and the machine manufacturer's specifications.

Provide testing equipment and materials to adequately measure the applicable sanitization method. 		1.Observed facility had QAC test strips available. Provide Chlorine test strips for the chlorine sanitizer used for the dishes. 0110 RETAIL MARKET<2000 SQ FT (HM3)
7-26-2024 Failure of the person operating a food facility pursuant to a variance or HACCP plan to designate at least one person to be responsible for developing HACCP plans, verifying that HACCP plans are effective, and training employees to adhere to the designated HACCP plans. 0.00 A HACCP Plan is a written document that delineates the formal procedures developed for safe food handling approved by the National Advisory Committee on Microbiological Criterira for Foods (114419). A written document approving a deviation from standard health code requirements shall be maintained at the food facility. (114057, 114057.1, 114091(f)(3))

The person operating a food facility pursuant to a HACCP plan shall designate at least one person to be responsible for developing HACCP plans, verifying that HACCP plans are effective, and training employees.

A minimum of one person per shift shall be designated who is knowledgeable in the HACCP plan or plans adopted by the operator to be responsible for adherence to any HACCP plan used, take corrective actions when necessary, and assure monitoring records are appropriately documented and retained, per the requirements of section 114419. 		Observed buildup of dirt and rock on top of the concrete base of the well. remove all dirt from on top of the concrete base. 0110 RETAIL MARKET<2000 SQ FT (HM3)
7-26-2024 The potable water supply shall be protected with a backflow or back siphonage protection device, as required by applicable plumbing codes. (114192) All plumbing and plumbing fixtures shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Any hose used for conveying potable water shall be of approved materials, labeled, properly stored, and used for no other purpose. (114171, 114189.1, 114190, 114192.1, 114193, 114193.1, 114195, 114197, 114199, 114201, 114269) 1.00 All plumbing and plumbing fixtures shall be installed in compliance with local plumbing ordinances, shall be maintained so as to prevent any contamination, and shall be kept clean, fully operative, and in good repair. Observed that the 3-comp sink had a leak from the faucet. repair. 0110 RETAIL MARKET<2000 SQ FT (HM3)


Rating on date 3-03-2022: Satisfactory (Total Points: 7.00)
DateViolationPointsCorrectionInspector CommentsFacility Area
3-03-2022 All utensils and equipment shall be fully operative, clean, and in good repair. (114115, 114175). All utensils and equipment shall be approved, installed properly, and meet applicable standards. (114130, 114130.1, 114130.2, 114130.3, 114130.4, 114130.5, 114130.6, 114132, 114133, 114137, 114139, 114143, 114153, 114155, 114163, 114165, 114167, 114169, 114172, 114175, 114177, 114180, 114182) 2.00 Equipment food-contact surfaces and utensils shall be clean to sight and touch. The food-contact surfaces of cooking equipment and pans shall be kept free of encrusted grease deposits and other debris accumulations.

Keep all food facilities, and all utensils, display cases, windows, counters, shelves, tables, refrigeration units, sinks, dishwashing machines, and other equipment or utensils used in the storage, preparation, sale, service, and display of food, clean, fully operative, and in good repair.

The non-food-contact surfaces of equipment shall be kept free of an accumulation of dust, dirt, food residue, and other debris. Equipment shall be reassembled so that food-contact surfaces are not contaminated. 		(REPEAT VIOLATION) Observed the use of scotch tape to adhere plastic liner to wooden shelf at the coffee bar area. Remove and discontinue practice. Tape is not allowed to be used. 0110 RETAIL MARKET<2000 SQ FT (HM3)
3-03-2022 Each food facility shall be kept free of live animals and vermin: rodents (rats, mice), cockroaches, flies.( 114259.1, 114259.4, 114259.5) 3.00 Live animals are not allowed in a food facility, except as specified in section 114259.5.

A food facility shall immediately cease operation when there is a vermin infestation that has resulted in the contamination of food contact surfaces, food packaging, utensils, food equipment, or adulteration of food(s). The food facility shall remain closed until:
(a) there is no longer evidence of a vermin infestation.
(b) all contaminated surfaces have been cleaned and sanitized.
(c) contributing factors such as cleaning, repairs, and the elimination of harborages have been resolved.

All contributing factors must be resolved as quickly as possible. If there is a vermin infestation that warrants a major violation, then the permit to operate may be suspended. Professional pest control may also be required as frequently as needed to prevent the infestation from recurring. 		Observed rodent droppings around the coffee/hot coco area. Clean/sanitize and increase frequency. Obtain professional pest control service. 0110 RETAIL MARKET<2000 SQ FT (HM3)
3-03-2022 Exhaust hoods shall be provided to remove toxic gases, heat, grease, vapors, and smoke and be approved by the local building department. Canopy-type hoods shall extend 6" beyond all cooking equipment. All areas shall have sufficient ventilation to facilitate proper food storage. Toilet rooms shall be vented to the outside air by a screened openable window, an air shaft, or a light-switch activated exhaust fan, consistent with local building codes. (114149, 114149.1) Adequate lighting shall be provided in all areas to facilitate cleaning and inspection. Light fixtures in areas where open food is stored, served, prepared, and where utensils are washed shall be of shatterproof construction or protected with light shields. (114149.2, 114149.3, 114252, 114252.1) 2.00 All areas shall have sufficient ventilation to facilitate proper food storage and to provide a reasonable condition of comfort for each employee, consistent with the job performed by the employee.

Light fixtures in areas where food is prepared, open food is stored, or utensils are cleaned shall be of shatterproof construction or shall be protected with shatterproof shields and shall be readily cleanable. In every room and area in which any food is prepared, manufactured, processed, or prepackaged, or in which equipment or utensils are cleaned, sufficient natural or artificial lighting shall be provided to produce the following light intensity, while the area is in use:
(a) At least 10-foot candles for the following:
(1) At a distance of 30 inches above the floor, in walk-in refrigeration units, and dry food storage areas.
(2) At a working surface on which alcoholic beverages are prepared or where utensils used in the preparation or service of alcoholic beverages are cleaned.
(3) Inside equipment, such as reach-in or under-the-counter refrigerators.
(b) At least 20-foot candles for the following:
(1) At a surface where food is provided for consumer self-service or where fresh produce or prepackaged foods are sold or offered for consumption.
(2) In server stations where food is prepared.
(3) At a distance of 30 inches above the floor in areas used for handwashing, warewashing, and equipment and utensil storage, and in toilet rooms.
(c) Except in server stations where food is prepared, at least 50-foot candles at a surface where a food employee is working with food or working with utensils or equipment such as knives, slicers, grinders, or saws where employee safety is a factor. 		(REPEAT VIOLATION) Observed the fan/ventilation unit inside both restrooms are not functioning. Repair/replace so both units are properly working and adequate air circulation is provided. 0110 RETAIL MARKET<2000 SQ FT (HM3)